KitchenAid 9-Cup Food Processor with ExactSlice™ System Utilizzo E Cura
10
ASSEMBLING THE FOOD PROCESSOR
Installing the r_ever_sible shr_edding disc or_ fr_ench fr_y disc
1
Hold the french fry disc or reversible
shredding disc by the 2 finger grips with
the desired shredding side facing UP.
Insert the disc adapter into the hole in
the bottom of the disc.
2
With the work bowl installed, slide the
drive adapter onto the power shaft.
Then install the work bowl cover, being
sure it locks into place.
TIP: You may need to turn the disc/adapter until it drops down into place.
ASSEMBLING THE FOOD PROCESSOR
Installing the multipur_pose blade
1
Place the blade on the power shaft.
Rotate the blade so it falls into place on
the power shaft.
IMPORTANT: The multipurpose blade can only be used with the work bowl.
Finger_ gr_ip
Dr_ive
adapter_
2
Push to lock: Press down firmly on the
multipurpose blade until it is down as
far as it will go. The multipurpose blade
features an internal seal that fits tightly
over the center of the work bowl.
Adjusting the slicing thickness
1
Set the desired slicing thickness by
moving the lever to the left for thinner
slices or to the right for thicker slices.
NOTE: The lever only works with the
adjustable slicing disc. Changing thickness
settings with other discs or blades installed
will have no effect on operation.
Thicker_
Thinner_
W10625435A_v3.indd 10
7/29/13 11:22 AM