Nikon D4S Manuale Utente

412

n

The D4S is equipped with a ten-pin remote terminal (

for remote control and automatic photography. The 
terminal is provided with a cap, which protects the contacts 
when the terminal is not in use. The following accessories 
can be used (all lengths are approximate):
• Remote Cord MC-22/MC-22A: Remote shutter release with blue, 

yellow, and black terminals for connection to a remote 
shutter-triggering device, allowing control via sound or 
electronic signals (length 1 m/3 ft 3 in.).

• Remote Cord MC-30/MC-30A: Remote shutter release; can be 

used to reduce camera shake (length 80 cm/2 ft 7 in.).

• Remote Cord MC-36/MC-36A: Remote shutter release; can be 

used for interval timer photography or to reduce camera 
shake or keep the shutter open during a time exposure 
(length 85 cm/2 ft 9 in.).

• Extension Cord MC-21/MC-21A: Can be connected to ML-3 or 

MC-series 20, 22, 22A, 23, 23A, 25, 25A, 30, 30A, 36, or 36A. 
Only one MC-21 or MC-21A can be used at a time (length 
3 m/9 ft  10 in.).

• Connecting Cord MC-23/MC-23A: Connects two cameras with 

ten-pin remote terminals for simultaneous operation 
(length 40 cm/1 ft 4 in.).

• Adapter Cord MC-25/MC-25A: Ten-pin to two-pin adapter cord 

for connection to devices with two-pin terminals, 
including the MW-2 radio control set, MT-2 
intervalometer, and ML-2 modulite control set (length 
20 cm/8 in.).

• WR Adapter WR-A10: An adapter used to connect WR-R10 

wireless remote controllers to cameras with ten-pin 
remote terminals.

• GPS Unit GP-1/GP-1A (

0 238): Record latitude, longitude, 

altitude, and UTC time with pictures.