Nikon COOLPIX P610 Manuale Di Riferimento
E
5
Re
fere
fere
nce
S
e
cti
on
on
y M d Sports
• While the shutter-release button is held all the way down, the camera shoots up
to about 7 images continuously at a rate of about 7 fps (when image quality is
set to Normal and image size is set to i 4608×3456).
set to Normal and image size is set to i 4608×3456).
• The frame rate for continuous shooting may become slow depending on the
current image quality setting, image size setting, the memory card used, or
shooting condition.
shooting condition.
• Focus, exposure, and hue are fixed at the values determined with the first image
in each series.
y M f Party/indoor
• To avoid the effects of camera shake, hold the camera steady. Set Vibration
reduction to Off in the setup menu (
A57) when using a tripod to stabilize the
camera during shooting.
y M k Close-up
On the screen displayed when k Close-up is selected, select Noise reduction
burst or Single shot.
• Noise reduction burst: This enables you to shoot a sharp image with a
burst or Single shot.
• Noise reduction burst: This enables you to shoot a sharp image with a
minimum of noise.
- Press the shutter-release button all the way to capture a series of images
- Press the shutter-release button all the way to capture a series of images
which are combined into a single image and saved.
- Once the shutter-release button is pressed all the way, hold the camera still
until a still image is displayed. After taking a picture, do not turn the camera
off before the monitor switches to the shooting screen.
off before the monitor switches to the shooting screen.
- If the subject moves or there is a significant camera shake during continuous
shooting, the image may be distorted, overlapped, or blurred.
- The angle of view (i.e., the area visible in the frame) seen in the saved image is
narrower than that seen in the monitor at the time of shooting.
• Single shot (default setting): Saves images with emphasized outlines and
contrast.
- One image is captured when the shutter-release button is pressed all the way.
- One image is captured when the shutter-release button is pressed all the way.
• The focus mode (
A40) setting is changed to D (macro close-up) and the
camera automatically zooms to the closest position at which it can focus.
• You can move the focus area. Press the
k button, use the multi selector
HIJK or rotate it to move the focus area, and press the k button to apply
the setting.
the setting.