Nikon D200 Manuale Utente
108
Ref
er
enc
e
—
C
C
onnec
ting t
o a C
omputer
Connecting the USB Cable
1
Turn the computer on and wait for it to start up.
3
Connect the UC-E4 USB cable as shown. Connect the camera directly to
the computer; do not connect the cable via a USB hub or keyboard.
2
Turn the camera off .
4
Turn the camera on. If Mass Storage is selected
for USB,
will be displayed in the control panel
and viewfi nder, and the PC mode indicator will
fl ash (if PTP is selected, the camera displays will
not change). Photographs can be transferred to
the computer as described in the manual for the
supplied software (on CD).
fl ash (if PTP is selected, the camera displays will
not change). Photographs can be transferred to
the computer as described in the manual for the
supplied software (on CD).
During Transfer
Do not turn the camera off while transfer is in progress.
If Nikon Capture 4 Camera Control is run ning,
the control panel will show
the control panel will show
in place of the
number of exposures remaining. Any photo-
graphs taken will be re cord ed to the com put er
hard disk rath er than the cam era mem o ry card.
See Nikon Capture 4 User’s Manual for more in for -
ma tion.
graphs taken will be re cord ed to the com put er
hard disk rath er than the cam era mem o ry card.
See Nikon Capture 4 User’s Manual for more in for -
ma tion.