Nikon DF Manuale Utente

355

n

ISO 100 – 12800 in steps of 

1

/

3

 EV. Can also be set to 

approx. 0.3, 0.7, or 1 EV (ISO 50 equivalent) below ISO 
100 or to approx. 0.3, 0.7, 1, 2, 3, or 4 EV (ISO 204800 
equivalent) above ISO 12800; auto ISO sensitivity 
control available

Can be selected from Auto, Extra high +2/+1, High, 
Normal, Low, or Off

Nikon Multi-CAM 4800 autofocus sensor module with 
TTL phase detection, fine-tuning, and 39 focus points 
(including 9 cross-type sensors; the center 33 points are 
available at apertures slower than f/5.6 and faster than 
f/8, while the center 7 focus points are available at f/8)

–1 – +19 EV (ISO 100, 20 °C/68 °F)

• Autofocus (AF): Single-servo AF (AF-S); continuous-servo 

AF (AF-C); predictive focus tracking activated 
automatically according to subject status

• Manual focus (M): Electronic rangefinder can be used

Can be selected from 39 or 11 focus points

Single-point AF; 9-, 21-, or 39-point dynamic-area AF, 
3D-tracking, auto-area AF

Focus can be locked by pressing shutter-release button 
halfway (single-servo AF) or by pressing A AE-L/AF-L 
button

: i-TTL flash control using 2016-pixel RGB sensor is 

available with SB-910, SB-900, SB-800, SB-700, SB-600, 
SB-400, or SB-300; i-TTL balanced fill-flash for digital SLR 
is used with matrix and center-weighted metering, 
standard i-TTL flash for digital SLR with spot metering

Front-curtain sync, slow sync, rear-curtain sync, red-eye 
reduction, red-eye reduction with slow sync, slow rear-
curtain sync, Auto FP High-Speed Sync supported