Nikon Camera Control Pro Manuale Utente

Before installing Camera Control Pro, be sure that your system meets the following require-
ments:

300 MHz Pentium or better recommended

Preinstalled versions of Windows XP Home Edition or Windows XP 
Professional, Windows 2000 Professional

50 MB  required for installation, with an additional 1 GB of free disk space 
available when Camera Control Pro is running

256 MB (768 MB or more recommended)

800 × 600 pixels or more with 16-bit color (High Color/thousands of colors). 
24-bit color (True Color/millions of colors) recommended.

*

USB: Only built-in USB ports supported
IEEE 1394: OHCI-compliant IEEE 1394 interface board or card required 

†

Supported cameras D1-series, D2-series, D100, D200, D70S, D70, D50

• CD-ROM drive required for installation
• Internet connection required for Nikon Message Center

*

  Connect the camera directly to the computer. The camera may not function as expected when 

connected via a hub, extension cable, or keyboard.

†

  See the website below for the latest information on boards that have been tested and approved 

for use.

Check the support information at the website below for the latest on compatible cameras 
and operating systems.

Europe ,Africa:  www.europe-nikon.com/support

Asia, Oceania, Middle East:  

U.S.A.:  www.nikonusa.com

Additional information may be available from the Nikon representative in your area.  
Visit http://nikonimaging.com/

 for contact information.