Nikon D500 Manuale Utente

171

Select a preset.
Press the 

U button and rotate the sub-command dial until 

the desired white balance preset (d-1 to d-6) is displayed in 
the control panel.

Select direct measurement mode.
Release the 

U button briefly and 

then press the button until the 

L 

icon in the control panel starts to 
flash. A flashing 

D will also 

appear in the viewfinder.

Measure white balance.
In the few seconds before the indicators stop 
flashing, frame the reference object so that it fills 
the viewfinder and press the shutter-release 
button all the way down. The camera will measure a value for 
white balance and store it in the preset selected in Step 3. No 
photograph will be recorded; white balance can be measured 
accurately even when the camera is not in focus.

U button