Nikon Nikon 1 V3 Manuale Di Riferimento
112
t
A
Optional Flash Units
Detailed instructions may be found in the manual provided with the
flash unit. Note that optional flash units may not fire at some camera
settings.
flash unit. Note that optional flash units may not fire at some camera
settings.
A
The Flash/Capture-Illuminator Status Indicators
Users of the SB-N5 are directed to check the table below if the flash sta-
tus or capture-illuminator status indicator on the rear of the unit
flashes. Users of the SB-N7 may refer to the manual provided with the
flash unit.
tus or capture-illuminator status indicator on the rear of the unit
flashes. Users of the SB-N7 may refer to the manual provided with the
flash unit.
Display
Description
The flash status indicator flashes
for about 3 seconds after a photo-
graph is taken.
for about 3 seconds after a photo-
graph is taken.
Subject may be underexposed. Try again
after reducing distance to subject or rais-
ing ISO sensitivity (
after reducing distance to subject or rais-
ing ISO sensitivity (
The flash or capture status indica-
tor flashes once a second.
tor flashes once a second.
Product has fired several times in quick
succession and has shut down tempo-
rarily to prevent overheating. Turn prod-
uct off and wait for it to cool.
succession and has shut down tempo-
rarily to prevent overheating. Turn prod-
uct off and wait for it to cool.
The flash and capture status indi-
cators flash once every 2 seconds.
cators flash once every 2 seconds.
A data transfer error has occurred. Check
that the flash unit is correctly attached.
that the flash unit is correctly attached.
The flash status indicator flashes
8 times a second.
8 times a second.
An error has occurred in the unit’s inter-
nal circuitry. Turn the camera off, remove
the flash unit, and take the camera and
flash unit to a Nikon-authorized service
center for consultation.
nal circuitry. Turn the camera off, remove
the flash unit, and take the camera and
flash unit to a Nikon-authorized service
center for consultation.