Nikon Nikon 1 V3 Manuale Di Riferimento
222
n
Power
sources
sources
• Rechargeable Li-ion Battery EN-EL20a (
EN-EL20a batteries are available from local retailers and
Nikon-authorized service representatives.
Nikon-authorized service representatives.
• Battery Charger MH-29 (
0 23): Recharge EN-EL20a batteries.
• Power Connector EP-5C, AC Adapter EH-5b: These accessories can
be used to power the camera for extended periods (EH-5a
and EH-5 AC adapters can also be used). An EP-5C power
connector is required to connect the camera to the EH-5b,
EH-5a, or EH-5; see page 225 for details.
and EH-5 AC adapters can also be used). An EP-5C power
connector is required to connect the camera to the EH-5b,
EH-5a, or EH-5; see page 225 for details.
Flash units
When mounted on the Nikon 1 V3, the following flash units
support i-TTL and manual flash control (
support i-TTL and manual flash control (
0 187).
• Speedlight SB-N5 (
0 109):The SB-N5 has a Guide Number of
8.5/27.9 (m/ft, ISO 100, 20 °C/68 °F; Guide Number at ISO
160 is 10.8/35.4).
160 is 10.8/35.4).
• Speedlight SB-N7 (
0 109): The SB-N7 has a Guide Number of
18/59 (m/ft, ISO 100, 20 °C/68 °F; Guide Number at ISO 160
is 22.8/74.8).
is 22.8/74.8).
Remote
controls
controls
Wireless Remote Control ML-L3
(
0 96): The ML-L3 uses a 3 V
CR2025 battery.
Pressing the battery-chamber latch to the right (q), insert a
fingernail into the gap and open the battery chamber (w).
Ensure that the battery is in the correct orientation (r).
fingernail into the gap and open the battery chamber (w).
Ensure that the battery is in the correct orientation (r).
Micro-
phones
phones
Stereo Microphone ME-1
(
0 193): Connect the ME-1 to the cam-
era microphone jack to record stereo sound while reducing
the noise caused by lens vibration being recorded during
autofocus.
the noise caused by lens vibration being recorded during
autofocus.