Nikon COOLPIX B500 Manuale Di Riferimento

Camera Setup

Pair (i.e., establish a Bluetooth link between) the camera and the 
smart device.

After checking that NFC is enabled on the smart 
device, touch the camera 

Y (N-Mark) to the NFC 

antenna on the smart device to launch the 
SnapBridge app.
- If the SnapBridge download site is displayed, 

download and install the app before repeating 
the above steps.

NFC Support
Press the camera 

k button. The camera will wait 

for a connection; launch the SnapBridge app on 
the smart device and follow the on-screen 
instructions to tap the name of the camera you 
want to pair with.

Check the authentication code.

• After confirming that the camera and smart device 

display the same six-digit authentication code, 
follow the steps below to complete pairing (note 
that the code may not be displayed in some 
versions of iOS, but you should follow the steps 
below even if the code is not displayed).
- On the camera, press 

k.

- On the smart device, tap Pairing (the name of 

the button varies with the smart device).

Cancel

Cancel

SnapBridge

App

Camera

On your smart device, go to the app
store and search for SnapBridge. After
installing, open the SnapBridge app.

Connect to Camera

Camera name

OK

OK

Auth. code

000000

Cancel

Cancel

Confirm that the same authentication
code is displayed on the smart device
and press OK.

Camera