Canon XF305 Manuale Istruttivo

Pagina di 217
Recording
110
3
Special Recording Modes
Pre-recording Mode
When pre-recording mode is activated, the camcorder starts recording 
continuously into a temporary memory of approximately 3 seconds so 
when you press the START/STOP button, the clip will contain also 
approximately 3 seconds of video and audio recorded before you 
pressed the button.
1 Open the [Special Rec] submenu.
[J Other Functions] 
 [Special Rec]
2 Select [Pre Rec] and then press SET.
• [PRE REC STBY] appears at the top of the screen.
3 Press the START/STOP button to begin recording.
• The tally lamps illuminate.
• [PRE REC STBY] changes to [N PRE REC] while recording.
4 Press the START/STOP button again to stop recording.
• The camcorder records the clip, including approximately 3 seconds 
of video and audio recorded before the START/STOP button was 
pressed.
• The tally lamps go out and [PRE REC STBY] appears at the top of 
the screen.
NOTES
• You can use only one special recording mode at a time.
• Pre-recording mode will be deactivated if the special recording mode is 
changed or turned off. It will be deactivated also if you change the 
video configuration.
• During pre-recording mode, the time code will be recorded with the 
running mode (0 85) set to [Free Run], regardless of the previous 
setting. Alternatively, you can use an external time code signal 
(b only). When the time code is recorded, it will include the 
3 seconds before the START/STOP button was pressed. When special 
recording mode is deactivated, the running mode will return to its 
previous setting.
[J Other Functions]
[
Special Rec]
[Off]
COP
Y