Canon XF305 Manuale Istruttivo

Recording

Setting the Time Code

Setting the Time Code’s Initial Value

If you set the running mode to [Preset], you can set the initial value of the
time code.

1 Open the time code [Setting] submenu.

[L TC/UB Setup]

[Time Code]

[Setting]

2 Select [Set] and then press SET.

• The time code setting screen appears with an orange selection frame

indicating the hours.

• To reset the time code to [00:00:00.00], select [Reset] instead.

3 Select the hours and then move (A) to minutes.

4 Change the rest of the fields (minutes, seconds, frame) in the same

way.

• Press the CANCEL button to close the screen without setting the

time code.

5 Select [Set] to close the screen.

• If the running mode is set to [Free Run], the time code will start

running from the value set in steps 2 to 4.

Selecting Drop or Non-Drop Frame

You can select between a drop frame (DF) or non-drop frame (NDF) time
code, depending on how you plan to use your recording. When the
[J Other Functions]

[Frame Rate] setting is set to [24P], the time code

will be set to non-drop frame.

1 Open the [DF/NDF] submenu.

[L TC/UB Setup]

[Time Code]

[DF/NDF]

2 Select [DF] or [NDF] and then press SET.

• The time code’s display will differ depending on the setting. When

you select [DF], the time code will appear as [00:00:00.00]; when you
select [NDF], it will appear as [00:00:00:00].

Putting the Time Code Display on Hold

If you set an assignable button to [Time Code Hold] (0 117), you can
freeze the display of the time code*. While the time code display is put on
hold, [H] will appear on the screen next to the time code and [HOLD] will
appear on the side panel.

[L TC/UB Setup]

[Time Code]

[Setting]

[L TC/UB Setup]

[Time Code]

[DF/NDF]

[DF]

COP