Canon ZR600 Manuale Istruttivo
30
Playback
Playing Back a Tape
1. Set the camcorder to
mode.
Set the
switch to PLAY and the
TAPE/CARD switch to
.
2. Open the LCD panel.
You can also close the LCD panel with the
screen facing out.
screen facing out.
3. If the joystick guide does not
appear on screen, press (
) to
display it.
4. Push the joystick (
) towards
to rewind the tape.
5. Push the joystick (
) towards
/
to play back the tape.
Push (
) again to pause the playback.
6. Push the joystick (
) towards
to stop the playback.
To use the viewfinder, close the LCD panel.
About the screen display: During playback, the time code gives the hours,
About the screen display: During playback, the time code gives the hours,
minutes, seconds and frames. The remaining tape time may not appear when
the time left is less than 15 seconds.
the time left is less than 15 seconds.
If the playback picture is distorted, clean the video heads using a Canon Head Cleaning
Cassette or a commercially available digital video head-cleaning cassette (
Cassette or a commercially available digital video head-cleaning cassette (
113).
Joystick