Canon ZR600 Manuale Istruttivo

Pagina di 131
88
Recording Movies on a Memory Card
You can record Motion JPEG movies with the camcorder, from a tape in the camcorder or 
from devices connected via the DV terminal or the AV terminal. The sound of a movie 
recorded on a memory card will be monaural.
1. Select the movie size for recording on the card: Open the FUNC. menu 
and select (
) the movie size icon. Select (
) a setting option 
other than the default 
 [MOVIE REC OFF] and close the menu.
2. Press the start/stop button to begin recording.
With SD Memory Cards up to 2 GB, you can record until “CARD FULL” appears 
(approx. 32 minutes with a 512 MB SD Memory Card). With MultiMediaCards, the 
recording time is limited to 10 sec. in 320 x 240 pixels or 30 sec. in 160 x 120 pixels.
3. Press the start/stop button to stop recording.
 Do not turn off the camcorder, change the position of the TAPE/CARD switch, 
disconnect the power source, open the memory card cover or remove the 
memory card while the CARD access indicator is flashing. Doing so could result 
in data damage.
 When you are using an SD Memory Card, make sure that the protect switch is 
set to allow recording.
 Do not load/unload a cassette during recording.
 We recommend using a Canon SD Memory Card, or an SD Memory Card with 
a transfer rate of more than 2 MB/sec., right after initializing it with this 
camcorder. With memory cards not initialized with this camcorder, or when 
recording/erasing has been repeatedly performed, the writing speed may be 
lower and recording may stop.
 You can select the focusing point when recording a movie on the memory card.
 Users of Windows XP: When you plan to connect the camcorder to a computer, 
keep the length of one movie shorter than approx. 12 min. in 320 x 240 or 35 
min. in 160 x 120.
Recording from a Tape in the Camcorder
1. Play back the tape.
2. Press the start/stop button when the scene you wish to record 
appears.
3. Press the start/stop button to stop recording.