Canon EOS 20D Manuale Istruttivo

Pagina di 168
153
If a camera error occurs, “Err xx” will be displayed on the LCD panel. 
Follow the instruction below to resolve the problem for respective error 
code.
If the same error occurs often, something is probably wrong with the 
camera. Jot down the “xx” error code and take your camera to the 
nearest Canon Service Center.
If an error occurs after you take a picture, the camera might have 
missed the shot. Press the <
x> button to see if the image appears on 
the LCD monitor.
Error Codes
Error Code
Countermeasures
Err 01
Communications between the camera and lens is faulty.
Clean the lens contacts. (p.9)
Err 02
There is a problem with the CF card. Try any of the following: 
Remove and re-insert the memory card. Formatting the CF 
Card. Use another CF card instead.
Err 04
The memory card is full. Erase unnecessary images in the card 
or replace the CF card.
Err 05
Something obstructed the built-in flash’s automatic pop-up 
operation.
Turn the <
4> switch to <1>.
Err 99
An error other than the above has occurred.
Remove and re-install the battery.
This error may occur if you use a non-Canon lens and the 
camera or lens does not operate properly.