Canon EOS D30 Manuale Istruttivo

Pagina di 151
82
Autoexposure Bracketing
When using autoexposure bracketing, the camera automatically changes the exposure level
within the set range (up to ±2 stops in 1/2-stop increments) for three successive frames. This is
called AEB (Auto Exposure Bracketing). The three bracketed shots are exposed in the selected
drive mode (
67)  in the following order: correct exposure, underexposure, and overexposure.
1
From the menu, select [AEB].
Press the 
MENU
button.
Turn the 
dial to select [AEB], then
press the 
button.
2
Set the AEB level.
Turn the 
dial to set the AEB level you
want, then press the 
button.
The AEB setting is entered, and the display
returns to the Menu.
Press the 
MENU
button to clear the
screen and exit the menu.
3
Take the picture.
When using continuous shooting, press
and hold the shutter button down fully to
take all three bracketed shots continuously,
and then stop automatically.
When using AEB with the self-timer, the
camera takes the three bracketed shots in
succession after the 10-second timer delay.
Canceling AEB
Follow steps 1 and 2 to set the AEB level to
.
AEB will be automatically cancelled when
the Main Switch is set to 
OFF
, the lens is
changed, the flash is charged, the battery
pack or the CF card is replaced.
:Correct exposure
:Underexposure
:Overexposure
Correct exposure (0)
Underexposure (-1.0)
Overexposure (+1.0)