Canon EOS D30 Manuale Istruttivo
94
FE Lock
FE (flash exposure) Lock obtains and locks the correct flash exposure reading for any part of
a subject. FE Lock is a function in the Creative zone.
a subject. FE Lock is a function in the Creative zone.
1
Make sure the
〈 〉
icon in the
viewfinder is on.
●
In the Creative zone, press the
〈 〉
button
to pop up the built-in flash.
2
Focus on the subject.
●
Focus on the subject you want to lock the
flash exposure on.
flash exposure on.
3
Place the center focusing point over
the subject, and press the
the subject, and press the
〈
〉
button.
(
)
The
〈
〉
icon lights in the viewfinder.
The Speedlite fires a preflash and records
the required flash output for this subject in
memory.
the required flash output for this subject in
memory.
In the viewfinder, the display appears as
shown in 1 for 0.5 seconds, then changes
to 2.
shown in 1 for 0.5 seconds, then changes
to 2.
●
Each time you press the
〈
〉
button the
preflash fires, and the FE lock is applied at
the required exposure level.
the required exposure level.
4
Take the picture.
●
Compose the shot and take the picture.
16
If the subject is far enough away to cause underexposure, the
〈 〉
icon will blink in
the viewfinder. Move closer to the subject and repeat steps 2 – 4.
q
w
Using the Built-in Flash