Canon PowerShot SX1 IS Guida Utente
138
In this mode, the camera automatically changes the exposure within a
set range to take three shots at the same interval as continuous
shooting (p. 110). The images are shot in the following order: Standard
exposure, underexposure and overexposure.
set range to take three shots at the same interval as continuous
shooting (p. 110). The images are shot in the following order: Standard
exposure, underexposure and overexposure.
To Cancel the AEB Mode:
Select
Select
in Step 1.
Auto Exposure Bracketing (AEB Mode)
Available Shooting Modes
1
Select AEB.
1. Press the
button.
2. Use the
or
button to
select
and use the
or
button to select
.
3. Press the DISP. button.
2
Adjust the
compensation range.
1. Adjust the compensation
range with the
or
button.
2. Press the
button.
• The compensation range can
be set as wide as 2 levels
lower and 2 levels higher than the standard exposure value (the
compensated exposure value if exposure adjustment was
performed) at the center point in 1/3 increments. If exposure
adjustment (p. 136) is already done, setting can be done with
the adjusted value as the center point.
lower and 2 levels higher than the standard exposure value (the
compensated exposure value if exposure adjustment was
performed) at the center point in 1/3 increments. If exposure
adjustment (p. 136) is already done, setting can be done with
the adjusted value as the center point.
The AEB mode is not available when shooting with the flash
on. Only one standard exposure image will be recorded.
on. Only one standard exposure image will be recorded.
Standard exposure
Compensation range
CO
PY