Canon VB-H651V Guida Al Funzionamento
Setting Page
5
187
[All non-detection areas]
All the non-detection areas in the Non-detection Area Settings (List) are displayed.
All the non-detection areas in the Non-detection Area Settings (List) are displayed.
[Only enabled non-detection areas]
Only the non-detection areas with [Enable non-detection area] selected in the Non-detection Area Settings (List) are
Only the non-detection areas with [Enable non-detection area] selected in the Non-detection Area Settings (List) are
displayed.
[Do not display]
No non-detection areas are displayed.
Restarting Intelligent Function
If the background video has changed while you were specifying settings or detection results are not as specified, restart
the Intelligent Function.
Reducing Effects of Lighting Change (Detections Settings)
The Intelligent Function may not work when the entire screen is exposed to sudden changes in brightness, for example,
when indoor lights are turned on or off. Changing the detection settings may reduce this effect.
The settings are saved and the Intelligent Function restarts.
1
If you have not yet obtained the camera control privileges, click the [Obtain/Release Camera Control Privileges]
button and obtain the control privileges.
button and obtain the control privileges.
2
Click [Restart intelligent function].
Important
It takes several tens of seconds for the Intelligent Function to restart. No detection is performed while restarting.
1
Click [Detection Settings].
2
Select [Reduce effects of lighting change] checkbox.
3
Click [Save settings].
Important
• It takes several seconds for the Intelligent Function to restart. No detection is performed while restarting.
• Settings in [Reduce effects of lighting change] may not work depending on the operating environment. Repeated sudden
changes in brightness may also have the same effect. Perform a detection test to check whether settings work correctly.