Canon XF305 Manuale

Pagina di 213
107
Recording
3
Special Recording Modes
Frame Recording Mode
Set the number of frames in advance. We recommend using the wireless 
controller or stabilizing the camcorder, for example, on a tripod. Sound is 
not recorded in this mode. This mode is not available if [J Other 
Functions]  
[Bit 
Rate/Resolution] is set to [35 Mbps 1440x1080].
Configuring Frame Recording Mode
1 Open the [Rec Frames] submenu.
[J Other Functions] 
 [Frame Rec] 
 [Rec Frames]
2 Select the desired number of frames and then press SET.
• Available options are 1, 3, 6 and 9 (2, 6 and 12 if [J Other Functions] 
 [Frame Rate] is set to [24P] or [60P]).
Activating Frame Recording Mode and Recording
1 Open the [Special Rec] submenu.
[J Other Functions] 
 [Special Rec]
2 Select [Frame Rec] and then press SET.
• [FRM STBY] appears at the top of the screen (with [FRM] flashing).
3 Press the START/STOP button to begin recording.
• The camcorder automatically records the set number of frames.
• The tally lamps illuminate.
• [FRM STBY] changes to [N FRM REC] while recording frames and 
[N FRM STBY] when frames are not being recorded.
• Repeat until you finish recording.
4 Open the [Special Rec] submenu.
[J Other Functions] 
 [Special Rec]
5 Select [Off] and then press SET.
• Frame recording mode ends and all of the recorded frames are joined 
together into one clip.
• The tally lamps go out and [STBY] appears at the top of the screen.
NOTES
• You can use only one special recording mode at a time.
• While recording, you cannot change the number of frames.
• Some frames at the point the recording was stopped may be recorded 
and added to the end of the clip.
• Frame recording mode will be deactivated if the special recording mode 
is changed or turned off. It will be deactivated also if you change the 
[J Other Functions] 
 [Bit Rate/Resolution] or [Frame Rate] setting.
[J Other Functions]
[
Frame Rec]
[Rec Frames]
[1]
[J Other Functions]
[
Special Rec]
[Off]