Canon imagePROGRAF iPF685 Manuale

 

Insert the Holder Stopper from the left in the Roll
Holder as shown. Holding it at the position shown
(b), push it firmly in until the flange (a) of the Holder
Stopper touches the roll. Lock the Holder Stopper
lever (c) by pushing it down toward the shaft side.

Follow these steps to load rolls in the printer.

Note

Before loading rolls, make sure the printer is clean inside the Top Cover and around the Ejection Guide. If these
areas are dirty, we recommend cleaning them in advance. 

 

Press the Load button.

Press ▲ or ▼ to select "Load Roll Paper", and then press the OK button.

Note

If any paper has been advanced that will not be used, a message is shown requesting you to remove it.
Press ▲ or ▼ to select Yes, and then press the OK button. Remove the paper and go to the next step.

 

 

iPF685 Series

                                                                                                                                                                  

Loading Rolls in the Printer

                                                                                                                                                                                                                       

Handling Paper

Handling rolls

15