ASUS H87-PRO Manuale Utente

1-18

Chapter 1: Product introduction

• 

The USB 3.0 module is purchased separately.

• 

These connectors are based on xHCI specification. We recommend you to install the 

related driver to fully use the USB 3.0 ports under Windows

®

 7.

• 

These connectors are set to [AHCI Mode] by default. If you intend to create a Serial 

ATA RAID set using these connectors, set the SATA Mode item in the BIOS to [RAID 

Mode]. Refer to section 3.6.3 SATA Configuration for details.

• 

Before creating a RAID set, refer to section 5.1 RAID configurations or the manual 

bundled in the motherboard support DVD.

• 

When using NCQ, set the SATA Mode in the BIOS to [AHCI Mode]. Refer to section 

3.6.3 SATA Configuration for details.

USB 3.0 connector (20-1 pin USB3_12)
This connector allows you to connect a USB 3.0 module for additional USB 3.0 front 

or rear panel ports. With an installed USB 3.0 module, you can enjoy all the benefits of 

USB 3.0 including faster data transfer speeds of up to 5Gbps, faster charging time for 

USB-chargeable devices, optimized power efficiency, and backward compatibility with 

USB 2.0.

USB3_12