ASUS RS300-E7/RS4 Guida All'Installazione Rapida

Chapter 2:  Components

2-6

The barebone server comes with a riser card bracket. You need to remove the 

bracket if you want to install PCI Express x8 or x16 expansion cards.

1.  Locate the PIKE RAID card slot on the motherboard, then remove the screw 

at the end of the PIKE slot on the motherboard.

2.  Tighten the screw to secure the PIKE card on the motherboard.
3.  Remove the SATA/SAS cables from the onboard SATA1–4 connectors.
4.  Connect the SATA/SAS cables to the onboard SAS1–4 connectors (blue).
5.  Move the SGPIO_SEL1 jumper on the SATA/SAS backplane to 2–3.

90-S00CS0150T PIKE 2108 8-port SAS 6G card. RAID Kit (�/W RAID 0, 1, 10, 5, 6, 50, 60)
90-S00CS0140T PIKE 2008/IMR 8-port SAS 6G card. RAID Kit (RAID 0, 1, 10, 5, 50)
90-S00CS0130T PIKE2008 8-port SAS 6G card. RAID Kit (RAID 0, 1, 10, 1E)