AEG Load Switch 6000006684 Dépliant

In combination with the SNMP (PRO) Adapter, the Load Switch 
enables intelligent load management using a UPS monitor, web 
browser or UNMS. The four output circuits can be operated 
individually, allowing delayed on/off switching as well as event-
driven switching (if a power outage occurs, for example). The 
front panel has four LEDs indicating the current switch status.

• 

Four separately controlled load circuits, each with an  

   IEC320 C13 connector 

• 

Individually programmable for automated remote  

   circuit/load management

• 

Robust metal enclosure designed for tower and  

   19“ rack installation

• 

Plug-and-go design for easy installation and expansion

• 

On/off switching via 10/100 Mbit Ethernet TCP/IP connection

• 

Secured using password-protected levels

Compatibility  

all Protect series UPS units with SNMP-PRO-Adapter 

Nominal input voltage/frequency  

230 Vac, 50 / 60 Hz 

Input connector 

IEC320 – C20 (16 A)

No. of output circuits (load connection)   

4 x IEC320 – C13 (10 A)

     

max. switching capacity per circuit (8A)

Dimensions (H x W x D)   Tower mode 

66 mm x 262 mm x 162 mm

                                    19’’ rack mode 

 66 mm (1,5 U) x 483 mm (19“) x 162 mm

Weight 

0,8 kg

AEG part number 

600 000 6684