ASUS RP-AC66 Guida All'Installazione Rapida
1
1
5
2
6
3
7
4
2
3
4
3
4
5
6
6
7
Fast. Easy. Setup!
RP-AC66 Quick Start Guide
2
Connect via
WPS
1
Power on
3
Find the best
spot
For setup, plug the RP-AC66 into a
power outlet within 6 feet of your
router/AP.
The LEDs should start blinking
once the RP-AC66 is plugged in.
Wait up to 1 minute for the
power
LED
to turn solid green.
The
Wi-Fi LED
indicates signal
strength to/from the router/AP for
both 2.4 and 5 GHz bands.
On your router/AP, press and
hold the
WPS
button for at least 3
seconds.
Quickly go to the RP-AC66 and
press and hold the
WPS
button
for at least 3 seconds. When the
connection is made, the LEDs will
change from blinking to solid.
To use both 2.4 and 5 GHz bands,
connect to Wi-Fi network: ASUS_
RPAC66, then go to
http://repeater.asus.com
to access
advanced settings. Use
admin
as
both username and password.
Move and plug in the RP-AC66
to the farthest place where
signal strength is excellent or
good according to the Wi-Fi
performance LEDs.
If the LED indicates poor signal,
move the RP-AC66 closer to the
router/AP.
When configured via WPS, either
the 2.4 or 5 GHz Wi-Fi LEDs will be
lit. Devices can still connect using
both bands.
NOTE
NOTE
IP: 192.168.1.1
Excellent
Good
Poor
No connection
none
Red
Orange
Green
2.4 GHz / 5 GHz Color
Performance
Wi-Fi network name: ASUS_RPAC66
Position within 6 feet.
LED
Router/AP
Power LED
WPS button
5GHz LED
Reset button
2.4GHz LED
Gigabit RJ-45
port
port
Power On/Off
switch
switch
Best performance
Poor performance
Login information
Wi-Fi performance LEDs
Signal strength between the router/AP and
RP-AC66
RP-AC66
Factory Default Setting
Your RP-AC66 is
now set up!
RP-AC66 Wi-Fi network name
Existing router network name_RPT
RP-AC66 Wi-Fi password
Existing router network password
Your network info should be:
WPS
WPS