Canon imagePROGRAF iPF6450 Manuale
Parts replacement time has passed.
Parts replacement time has passed.
Cause
Corrective Action
It is past the recommended time to replace consumables for which service is required.
Contact your Canon dealer for assistance.
Unknown file.
Unknown file.
Cause
Corrective Action
Data sent to keep the printer up to date (such as paper
information) is in the wrong format.
information) is in the wrong format.
Check the data. Turn off the printer and wait a while before restoring power, and
then resend the data.
then resend the data.
You have uploaded firmware for a different model.
Check the firmware version. Turn off the printer and wait a while before restor-
ing power, and then resend the firmware.
ing power, and then resend the firmware.
If the message is displayed again, contact your Canon dealer for assistance.
Calibration There is a problem with the multi-sensor.
Calibration There is a problem with the multi-sensor.
Cause
Corrective Action
The performance of a sensor inside the printer may be
impaired.
impaired.
Press the OK button and cancel calibration. Contact your Canon dealer for as-
sistance.
sistance.
Multi-sensor error
Multi-sensor error
Cause
Corrective Action
Direct sunlight or strong lighting may be shining on the
printer and causing the sensor to malfunction.
printer and causing the sensor to malfunction.
Take steps to ensure the printer is not used when exposed to direct sunlight or
strong lighting.
strong lighting.
The performance of a sensor inside the printer may be
impaired.
impaired.
Turn off the printer and wait at least three seconds before restoring the power.
If the message is displayed again, contact your Canon dealer for assistance.
If the message is displayed again, contact your Canon dealer for assistance.
iPF6450
Parts replacement time has passed.
Error Message
Other Messages
155