Canon imagePROGRAF iPF785 MFP M40 Manuale
Regular printing is selected, but a roll is loaded.
Regular printing is selected, but a roll is loaded.
Cause
Corrective Action
A print job for printing on
sheets was sent when a roll
is loaded.
sheets was sent when a roll
is loaded.
1.
Press ▲ or ▼ to select Remove Roll Paper, and then press the OK button to stop printing.
2.
After removing the roll, load and print on a sheet of the type and size of paper you have specified
in the printer driver.
in the printer driver.
(See "Loading and Printing on Sheets.")
➔
User's Guide
Press ▲ or ▼ to select Stop Printing, and then press the OK button to stop printing.
Paper jam
Paper jam
Cause
Corrective Action
A paper jam oc-
curred in the
printer during
printing.
curred in the
printer during
printing.
For roll paper, cut the paper on the upper side of the {Paper Feed Slot.
1.
Push the Release Lever back and remove the jammed paper.
2.
Load the paper.
3.
Pull the Release Lever forward.
4.
If "Not finished printing. Finish printing remaining jobs?" is shown on the Display Screen, press the OK
button.
Printing will resume, starting from the page on which the error occurred.
button.
Printing will resume, starting from the page on which the error occurred.
Paper is crooked.
Paper is crooked.
Cause
Corrective Action
Paper loaded crooked was detected when the paper was advanced.
Follow these steps to reload the roll.
1.
Push the Release Lever back.
2.
Adjust the right edge of the roll to make it parallel to the
orange Paper Alignment Line.
orange Paper Alignment Line.
3.
Pull the Release Lever forward.
If this error recurs after you reload the roll, remove the Roll
Holder from the printer, push the roll firmly in until it touches
the Roll Holder flange, and reload the Roll Holder in the print-
er.
Holder from the printer, push the roll firmly in until it touches
the Roll Holder flange, and reload the Roll Holder in the print-
er.
Follow these step to reload a sheet.
1.
Push the Release Lever back.
2.
Pull out the sheet.
3.
Pull the Release Lever forward.
4.
Reload the sheet, aligning it with the guide on the right.
Important
•
To disable this message (if it is displayed repeatedly despite reloading paper, for example), choose Off or Loose
in the Skew Check Lv. setting of the printer menu. However, this may cause jams and printing problems be-
cause paper may be askew when printed. Also, the Platen may become soiled, which may soil the back of the
next document when it is printed.
in the Skew Check Lv. setting of the printer menu. However, this may cause jams and printing problems be-
cause paper may be askew when printed. Also, the Platen may become soiled, which may soil the back of the
next document when it is printed.
Regular printing is selected, but a roll is loaded.
iPF785 Series
Error Message
Messages regarding paper
118