Canon imageRUNNER ADVANCE 6255 Manuale
30
This section describes the fl ow of basic fax operations.
An optional product is required to use the Fax function.
An optional product is required to use the Fax function.
Sending a Fax
2
Selecting Function
Select [Fax] from the Main Menu screen.
Press [Fax].
Fax Basic Features screen is displayed.
1
Placing Originals
Place the original on the feeder or the platen glass.
Placing originals in the feeder
Adjust the slide guides to fi t the size of your originals. Neatly place
your originals with the side to be copied face up.
your originals with the side to be copied face up.
Placing originals on the platen glass
Open the feeder/platen cover.
Place your originals face down.
Gently close the feeder/platen cover.
You can set various facsimile functions. For more
information, see from p. 32 to p. 35 in this manual.
information, see from p. 32 to p. 35 in this manual.
• If a log in screen for Department ID Management or SSO-H appears, you must enter the applicable authentication information (ID, password/
PIN). If the Copy Card Reader-F1 is attached, fi rst insert a control card.
• If a login service, such as Department ID Management or SSO-H has been set, press
(Log In/Out) to log out.
• The send settings for the last send job may be retained.
- To cancel the settings, press
(Reset).
- The specifi ed destinations are not retained.