Canon imagePROGRAF iPF830 Manuale

 

Tape down printer covers to secure them, in the re-
verse order of tape removal during installation.

Remove and package the Stand by reversing the installation procedure, when it was attached to the printer.

Disassemble and repackage the Stand by following the installation procedure in reverse.

Repack the Roll Holder, Holder Stopper, and printer in shipping materials, and then package them in a
shipping box.

The basic workflow for reinstalling the printer is as follows.
For detailed instructions, see the Setup Guide.

Assemble the stand

Referring to the Printer Stand Setup Guide, assemble the Stand.

Caution

The Stand must be assembled by at least two people on a flat surface. Attempting assembly by yourself
poses a risk of injury or bending the Stand.

When assembling the Stand, lock the casters. In addition, always unlock the casters before moving the
assembled Stand. Attempting to move the stand when the casters are locked poses a risk of injury or
damage to the location site.

 

Attach the Roll Unit to the Stand.

 

 

Reinstalling the Printer

                                                                                                                                                                                 

iPF850 Series

                                                                                                                                                                                                                      

Printer Relocation

Preparing to Transfer the Printer

 

92