Canon imagePROGRAF iPF6400S Manuale

Loading Heavyweight Sheets in the Front Paper Feed Slot

Important

Always load POP Board in the Front Paper Feed Slot for printing. Loading it in other ways may impair operation and
damage the printer.

One sheet of paper can be loaded at a time. Do not load multiple sheets. This may cause paper jams.

Straighten paper if it is warped before loading it.

Load the paper straight. Loading paper askew will cause an error.

Once you load the paper, you cannot shift it sideways. Load the paper straight.

If paper other than POP Board is loaded in the Front Paper Feed Slot, you might not be able to shift the paper or pull
it out from the front.

Note

Store unused paper in the original package, away from high temperature, humidity, and direct sunlight.

Follow the steps below to perform loading procedures in a printer with no Spectrophotometer Unit (option).
When using a printer with a Spectrophotometer Unit (option), {G:anc3,i:For Printers with a Spectrophotometer Unit (op-
tion)}

 

If the message "Leave 70cm (28") space behind printer."
is displayed, check the space behind the printer, pull up the
four Front Tray Guides above the Ejection Guide, and
press the OK button.

Note

Sufficient space behind the printer is required when loading paper in the Front Paper Feed Slot. For details on
the installation space required, 

 

Loading Sheets in the Feed Slot

                                                                                                                                                                                

iPF6400S

                                                                                                                                                                                                                             

Handling and Use of Paper

Handling sheets

 

532