Canon imagePROGRAF iPF6400S Manuale

Note

If the Tab Selection screen is not displayed, press the Menu button.

Press the OK button.
The Set./Adj. Menu is displayed.

Press ▲ or ▼ to select Adjust Printer, and then press the OK button.

Press ▲ or ▼ to select Head Posi. Adj., and then press the OK button.

Press ▲ or ▼ to select Other, and then press the OK button.

Press ▲ or ▼ to select Manual, and then press the OK button.
A test pattern is printed for adjustment.

Note

Manual may be unavailable in some cases, even if it is displayed in the menu.
If so, execute Standard once.

Press ▲ or ▼ to select D, and then press the OK button.

Press ▲ or ▼ to select D-1, and then press the OK button.

 

Examine adjustment test pattern D-1 and determine the number with
straight lines.

Note

If two patterns seem equally good and you cannot decide which one is better, choose an intermediate value.
For example, choose 11 if you cannot decide whether pattern 10 or 12 is better.

Press ▲ or ▼ to select the pattern number you have decided, and then press the OK button.

Repeat steps 8–10 to specify the adjustment value for D-1 to D-5, D-7 to D-12, D-25 to D-29, and D-31 to
D-36.

Press the Back button.

Press ▲ or ▼ to select Register Setting, and then press the OK button.

Press ▲ or ▼ to select Yes, and then press the OK button.
The adjustment value is now registered, and adjustment is complete.

Printhead position adjustment is executed when the printhead is first installed.
This adjustment should be executed in the following situations.

If adjusting the printhead position has not been performed such as due to an error during initial setup

 

iPF6400S

                                                                                                                                                                   

Adjustment When Installing the Printhead

                                                                                                                                                                                                                             

Adjustments for Better Print Quality

Adjusting the Printhead

767