Canon imagePROGRAF iPF6450 Manuale

 

Holding the Roll Holder flange (a), load the Roll Holder
shaft into the guide grooves (b) on both sides of the
Roll Holder Slot. At this time, load the shaft so that the
color of the Roll Holder shaft (c) matches the color of
the guide groove.

Caution

Do not release the flanges until you load the holder fully in the Roll Holder Slot. Rolls are heavy, and dropping a roll
may cause injury.

Be careful not to pinch your fingers between the guide grooves (b) and the Roll Holder shaft (c) when loading rolls.

Important

Do not force the Roll Holder into the printer with the right and left ends reversed. Otherwise, it may damage the
printer or Roll Holder.

Note

If it is difficult to load rolls from the front of the printer, load rolls from the back of the printer.
If the printer has a Spectrophotometer Unit (option), lowering the Up-down Unit makes it easier to perform operations
from the front of the printer. 

 

Insert the edge of the roll in the Paper Feed Slot (a) and
advance the roll until you hear the feed tone.

Important

Be careful not to soil the printing surface of roll paper as you insert it in the slot. This may affect the printing quality.
We recommend wearing clean cloth gloves when handling rolls to protect the printing surface.

If the paper is wrinkled or warped, straighten it out before loading it.

Load paper straight so it is not fed askew.

 

 

 

iPF6450

                                                                                                                                                                                                

Loading Rolls in the Printer

                                                                                                                                                                                                                                         

Handling and Use of Paper

Handling rolls

537