Canon REALiS WUX500 Pro AV Manuale

145

Advance

d

 Guid

e

Ad
va

nced Pr

ojection

This section describes the steps for selecting an image in the USB file browser and 
projecting on the screen.

■ Selecting a Drive

This step may not be necessary when a USB flash drive is connected directly to the 
projector’s USB port.
If a USB memory card reader having multiple memory slots is connected, the drive 
(memory slot) list is displayed in the file list.
Select the drive in which the memory card is inserted with [ ] / [ ], and press the 
OK button.
• Active drives are displayed in white text, while inactive drives are grayed out.

■ Selecting a Folder

In list view, folders that contain images can be selected.
• To return to the higher level, select [

].

■ Selecting an Image File for Projection

When you select an image file, a small preview of the image is shown in the 
preview area.
For full-screen projection of the image, press the OK button.
To return to the higher level, select [

].

■ Changing the View

To switch the view, select [Thumbnail view] or [List view] in the drive or file list and 
press the OK button.

When images are projected, you can perform the following operations.
Project the previous or next image by pressing the [ ] / [ ] buttons.
Rotate images left or right 90° by pressing the [ ] / [ ] buttons.
Return to the USB file browser by pressing the OK button.
• These operations are also available during slideshows. (Except during 

transitions.)

• If the image contains rotational information, the image is rotated to an appropriate 

direction automatically.