Canon REALiS WUX500 Pro AV Manuale

Pagina di 190
21
Before Installation
Before Inst
allat
ion
■ Install Facing in the Correct Direction
When installing the projector facing upward or downward, specify which way the projector 
is facing in [Install settings] > [Professional settings] > [Vertical projection]. (
)
• The projector can be installed facing any direction*
1
, as shown 
below. However, projection upward or downward may shorten the 
useful life of the lamp. [Install settings] of the projector must also 
be adjusted. Specifically, for upward or downward projection, refer 
to instructions for [Vertical projection] (
) in the [Install settings] 
menu.
• Do not attempt to install the projector for upward or downward 
projection by yourself. Always request installation by a qualified 
technician or the Canon Customer Support Center.
*1 No optional accessories are available for installing the projector in 
ways other than ceiling installation (
).
*2 An inclination of more than 10 degrees may damage the lamp.
Upward 
projection:
Inclination of the 
projector should 
be no more than 
10° from the 
vertical axis.*
2
Downward 
projection:
Inclination of the 
projector should 
be no more than 
10° from the 
vertical axis.*
2
If installing the projector 
on the floor or hanging 
from the ceiling, the left / 
right inclination of the 
projector should be no 
more than 10°.*
2
Do not use the 
projector standing 
on its side. This may 
damage the lamp.*
2
10° 10°
10°
10°
10° 10°