Canon REALiS WUX500 Pro AV Manuale

35

Be
fo

re

 Us
e

■ Remote Control Operating Range

The remote control is an infrared type. Point it at the infrared remote receiver on the 
front or rear of the projector to operate it.

■ Using an Optional Wired Remote (RS-RC05)

To use a wired remote control with the projector, use the RS-RC05, sold separately.
Use a cable with a ø3.5 mm stereo mini jack (not included).

• Use the remote control within an angle of 25° in any direction from directly in front of the 

infrared remote receiver.

• The remote control may be inoperative if there is an obstacle between the remote 

control and the projector or the infrared remote receiver on the projector is exposed to 
direct sunlight or strong light of lighting equipment.

• When you use 2 or more projectors at the same time, you can change the channel 

settings to prevent the 2 remote controls from interfering with each other. (

)

• Infrared operations cannot be performed if a cable is connected to the projector or the 

remote control.

• Use a cable with a ø3.5 mm stereo mini jack (not included) with a length of 30 m (98.4') 

or less.

25°

25°

8 m (26.3')

8 m (26.3')

25°

25°

ø3.5 mm stereo mini jack 

cable (not included)

Terminal for wired 

remote control

Remote control 

(RS-RC05)