Canon REALiS WUX500 Pro AV Manuale

62

■ Selecting an Image Mode

Press the IMAGE button on the remote control to select.
The image mode changes each time the IMAGE button is pressed. (The displayed 
image modes vary depending on the selected input signal.)

You can also select any image mode from the [Image mode] menu. (

)

• User settings 1 - 5 are displayed when the desired image settings have been 

created and stored using the user memory function in the image adjustment 
menu. (

When this window is displayed, press the POWER button again to turn off 
the power.
After you turn the power off, the projector will enter standby mode once it cools 
down.

If you want to continue projecting without turning off the power, press a button other than 
POWER, or else wait until the confirmation message disappears.

• After turning off the projector, wait at least 5 minutes before turning it on again. It may 

shorten the lamp life if you turn on the projector immediately after turning it off.

• Using the projector for extended periods may shorten the life of the lamp and internal 

optical components.

• Unplug the projector if it will not be used for an extended period.

Remote control

Remote control

Projector