Canon Océ VarioPrint 6000+ Series Manuale

The printer has the following button to control the power supply.

Sleep button

The Sleep button is located at the right-hand side of the
operator panel. Using the Sleep button puts the printer
into sleep mode, wakes the printer up from the sleep
mode or starts up the whole system, including the PRIS-
MAsync controller.
When you press the Sleep button
• when the system is off, the whole system starts up, in-

cluding the PRISMAsync controller.

• when the system is ready, the printer is put into sleep

mode. The operator panel will be turned off, The
PRISMAsync controller remains on.

• when the system is in sleep mode, the printer wakes

up from the sleep mode.

The Sleep button allows you to switch between the
Ready mode and the Sleep mode.

You can find the energy saving settings in the Settings Editor under [Preferences] -> [System
settings] -> [Energy save modes].

The power modes

Off

Off

The printer and the controller are completely off. The
printer cannot receive or print any job.

Ready

On

The printer is ready to print jobs.

Low power mode Off

The low power mode is an energy save mode.
To use the low power mode, the [Low power mode tim-
er enabled] setting in the Settings Editor must be set to
[Yes]. When this setting is disabled, the printer skips the
low power mode and goes into the sleep mode after the
time set for this mode.
When the printer has been idle for the time defined in
the [Low power mode timer] setting, the printer goes in-
to low power mode automatically.
Possible values: 1 - 15 minutes.
Factory default: 15 minutes.
The printer wakes up when a job arrives in the list of
[Scheduled jobs] or when you touch the operator panel
(either the screen or any button).

4