Canon Océ VarioPrint 6000+ Series Manuale

When a paper jam occurs in the puncher, the printer will stop printing and go on hold. The printer
operator panel displays a message that asks you to remove the sheets from the puncher. The
printer operator panel does not display the required actions step by step. Therefore, you must
check the following places for jammed media.
• The bypass
• The downward paper path
• The die set
• The bottom of the paper path
• The upward paper path.

Besides a paper jam, there are other possible problems the puncher can face. This section
describes the actions you must take to solve the problems.

Solve a problem

The puncher does not punch

• Check if the power switch   of the puncher is in the 'I' posi-

tion.

• Check if the power cord is correctly attached to the back of

the puncher.

• Check if the power cord is correctly plugged into the wall

socket.

You cannot easily pull out the
die set

The die set is in a partial cycle. Turn knob K3/K7 clockwise un-
til the puncher is in the home position. Then the black lines
on the knob (3) and the frame are aligned. The die set should
now slide out easily.