Canon EOS Rebel T6s EF-S 18-135mm IS STM Lens Kit Manuale

335

Preparing to Print



Press the <

x

> button.



The image will appear with the <w> 
icon on the upper left of the screen to 
indicate that the camera is connected 
to a printer.



Before using the printer, make sure it has a PictBridge connection port.



Movies cannot be printed.



The camera cannot be used with printers compatible only with CP Direct 
or Bubble Jet Direct.



Do not use any interface cable other than the one provided.



If there is a long beeping sound in step 5, it indicates a problem with the 
printer. Resolve the problem displayed in the error message (p.342).



If any of the following shooting modes or functions is set, the camera 
cannot be connected to a printer. Cancel all the relevant settings, then 
reconnect the camera to the printer with an interface cable.
• <F> or <G> in <8> mode
• Multi Shot Noise Reduction
• [51: Wi-Fi/NFC] set to [Enable]



You can also print RAW images taken with this camera.



When you use a battery to power the camera, make sure it is fully 
charged. With a fully-charged battery pack, you can print for approx. 2 hr.



Before disconnecting the cable, first turn off the camera and printer. Hold 
the plug (not the cord) to pull out the cable.



For direct printing, using the DC Coupler DR-E18 (sold separately) and 
AC Adapter AC-E6N (sold separately) to power the camera is 
recommended.