Canon EOS 7D Mark II Wi-Fi Adapter Kit Manuale
125
In the <d> <s> <f> <a> <F>
modes, just press the <D> button to raise
the built-in flash for flash photography.
Before shooting, check that [D] is displayed
in the viewfinder. After shooting, push the
built-in flash back down with your fingers
until it clicks into place.
modes, just press the <D> button to raise
the built-in flash for flash photography.
Before shooting, check that [D] is displayed
in the viewfinder. After shooting, push the
built-in flash back down with your fingers
until it clicks into place.
In the <A> mode, the built-in flash will be raised and fire automatically
in low-light or backlit conditions. You can also enable or disable the
flash firing.
The table below shows the shutter speed and aperture settings that will
be used with flash.
in low-light or backlit conditions. You can also enable or disable the
flash firing.
The table below shows the shutter speed and aperture settings that will
be used with flash.
D
Using the Built-in Flash
Shooting Mode
Shutter Speed
Aperture
A
Automatically set
Automatically set
d
Automatically set
(1/250 sec. - 1/60 sec.)
(1/250 sec. - 1/60 sec.)
Automatically set
s
Manually set (1/250 sec. - 30 sec.)
Automatically set
f
Automatically set
(1/250 sec. - 30 sec.)
(1/250 sec. - 30 sec.)
Manually set
a
Manually set (1/250 sec. - 30 sec.)
Manually set
F
Exposure continues while you hold
down the shutter button or while
the bulb timer is operating.
down the shutter button or while
the bulb timer is operating.
Manually set