Canon EOS 7D Mark II Wi-Fi Adapter Kit Manuale

223

a

: Manual Exposure

If the ISO speed is set to A (AUTO), you can set exposure 
compensation (p.226) as follows.

• [z2: Expo.comp./AEB]
• Under [83: Custom Controls], use [s: Expo comp (hold btn, 

turn )] (p.455) or [p: Expo comp (hold down lever, turn 

)] 

(p.455).

• Quick Control (p.61)

Set the exposure compensation amount while checking the exposure 
level indicator on the lower part of the viewfinder or on the LCD panel.

 

If Auto ISO is set, the ISO speed setting will change to suit the shutter 
speed and aperture in order to obtain a standard exposure. Therefore, 
you may not obtain the desired exposure effect. In such a case, set the 
exposure compensation.

 

If flash is used when Auto ISO is set, exposure compensation will not be 
applied even if an exposure compensation amount is set.

 

Under [z2: Auto Lighting Optimizer], if the checkmark <X> for 
[Disabled in M or B modes] is removed, Auto Lighting Optimizer can be 
set even in the <a> mode (p.175).

 

When Auto ISO is set, you can press the <A> button to lock the ISO 
speed.

 

If you press the <A> button and recompose the shot, you can see the 
exposure level difference on the exposure level indicator compared to 
when you pressed the <A> button.

 

If exposure compensation (p.226) was applied in <d>, <s>, or <f> 
mode, and then the shooting mode is switched to <a> with Auto ISO 
set, the exposure compensation amount already set will be maintained.

 

With Auto ISO set and [81: ISO speed setting increments] set to [1/2-
stop], any 1/2-stop exposure compensation will be implemented with the 
ISO speed (1/3 stop) and shutter speed. However, the shutter speed 
displayed will not change.