Canon EOS 7D Mark II Wi-Fi Adapter Kit Manuale

297

3

 Menu Function Settings

z

6 N

 

Silent LV shootingN
• Mode  1

You can suppress the camera noise when shooting. Continuous 
shooting is also possible. If <o> is set, you can shoot at a 
maximum continuous shooting speed of approx. 10.0 fps.

When the shutter button is pressed completely, only one shot will 
be taken. While you keep holding down the shutter button, the 
camera operation will be suspended. Then when you return to the 
shutter button’s halfway position, the camera operation will 
resume. The shooting noise is thereby minimized. Even if 
continuous shooting is set, only a single shot will be taken.

Be sure to set it to [Disable] if you use a TS-E lens (other than 
those listed in   below) for shifting or tilting the lens or if you 
use an Extension Tube. If [Mode 1] or [Mode 2] is set, the standard 
exposure may not be obtained, or an irregular exposure may 
result.

 

If you use [Mode 1] with continuous shooting, the [Disable] setting will 
be applied to the second and subsequent shots.

 

When shooting with flash, the [Disable] setting will be applied regardless 
of the [Silent LV shoot.] setting. (Silent shooting cannot be performed.)

 

When using a non-Canon flash unit, set it to [Disable]. The flash will not 
fire if it is set to [Mode 1] or [Mode 2].

 

If [Mode 2] is set and you use a Remote Controller (p.248), the operation 
will be the same as with [Mode 1].

With the TS-E17mm f/4L or TS-E24mm f/3.5L II lens, you can use [Mode 1] 
or [Mode 2].