Canon EOS 7D Mark II Wi-Fi Adapter Kit Manuale
Installing and Removing the Card
42
3
Close the cover.
Close the cover and slide it in the
direction shown by the arrows until it
snaps shut.
direction shown by the arrows until it
snaps shut.
X
When you set the power switch to
<1> (p.45), the number of possible
shots and the loaded card(s) will be
displayed on the LCD panel.
The images will be recorded to the
card indicated by the arrow < >
icon.
<1> (p.45), the number of possible
shots and the loaded card(s) will be
displayed on the LCD panel.
The images will be recorded to the
card indicated by the arrow < >
icon.
CF card indicator
SD card indicator
Card
selection icon
selection icon
Possible
shots
shots
The camera cannot use Type II CF cards or hard disk-type cards.
The Wi-Fi Adapter W-E1 cannot save images. Also, the SD card
indicator will not be displayed for it.
indicator will not be displayed for it.
Ultra DMA (UDMA) CF cards can also be used with the camera. UDMA
cards enable faster data writing.
cards enable faster data writing.
SD/SDHC/SDXC memory cards are supported. UHS-I SDHC or SDXC
memory cards can also be used.
memory cards can also be used.
The number of possible shots depends on the remaining capacity of the
card, image-recording quality, ISO speed, etc.
card, image-recording quality, ISO speed, etc.
Even if shooting 2,000 or more shots is possible, the indicator will display
only up to 1999.
only up to 1999.
Setting [z1: Release shutter without card] to [Disable] will prevent
you from forgetting to insert a card (p.484).
you from forgetting to insert a card (p.484).