Olympus P-11 Manuale Istruttivo

 

After printing begins, the ACCESS indicator on the printer blinks. 
When printing is finished, the indicator turns off. 

For details on operating the digital camera, refer to the 
instruction manual for the digital camera. 

After printing is complete, turn off the digital camera and printer 
before disconnecting the USB cable.

 

Do not remove the ink ribbon cartridge or paper tray during printing. 

 

Do not move the printer during printing.

 

Do not turn off the printer and digital camera or disconnect the AC adapter 
during printing. In the event that the power is turned off or the AC adapter is 
disconnected, turn the power back on. After the paper is automatically 
ejected, perform the operation again. Leaving the printer without restoring 
the power may cause a malfunction. 

 

If printing does not start up again after you and more paper, remove the 
ribbon cartridge once and then insert it again. Printing will resume 
automatically.

 

If the print setting [Not Edged] (borderless) is selected, the edges of 
pictures will be cut off during printing because the width and height ratio 
with which pictures are taken by the camera is usually 4:3. 
When taking pictures, make sure the composition sufficiently compensate 
for this. 
If the print setting [Edged] (bordered) is selected, the picture size will be 
smaller but the whole picture will be printed.

p11_e_000_bookfile.book  Page 25  Monday, July 25, 2005  10:47 AM