Olympus DM-520 Manuale Introduttivo

a

b

c

 Press the 9 or 0 button

•  The VCVA level can be set to any of 15 

different values.

•  The higher the value, the more 

sensitive the recorder to sounds. At 

the highest value, even the faintest 

sound will activate recording.

a

 Level meter (varies according to the 

sound volume being recorded)

b

 Start level (moves to the right/left 

according to the set level)

c

 Start level/Recording level switch 

button (Only when [VCVA]:[On],[Rec

Level]:[Manual] is set, it is displayed.)

•  Press the 

F1 button to change 

the recording level during VCVA 

recording. The recording level can be 

adjusted. 

•  The start/stop actuation level also varies 

depending on the selected microphone 

sensitivity mode (☞ P.47).

•  If the starting level is not adjusted within 

2 seconds, the display will return to the 

previous.

•  If the surrounding noise is loud, the 

starting sensitivity of the VCVA can be 

adjusted according to the recording 

situation.

•  To ensure successful recordings, prior 

testing and adjustment of the start/stop 

actuation level is recommended.

When [Standby] is set to [On] with the menu 

setting,  the  recording  will  not  be  output 

from the earphone while in VCVA standby. 

When you monitor your recording with the 

earphone connected, you can check whether 

VCVA  is  launched  or  not  by  checking  if  an 

audio is output.

[On]:

  Enables the Standby Monitor function.

[Off]:

  Disables this function.

Refer to “Timer Recording [Timer Rec]” 

(☞ P.60).

Refer to “Setting the Recording Scene [Rec

Scene]” (☞ P.62).