Olympus DM-520 Manuale Introduttivo

a

1

 Press the 9 or 0 button to 

select "Hour"and "Minute" in the 

[Start Time] and "Hour" and "Minute" 

in the [Stop Time].

2

 Press the + or – button to set.

3

 Press the OK button to exit [Time] 

selection.

Regardless of the regular [Rec Mode] (☞ 

P.47),  timer  recording  will  start  in  a  set 

recording mode.

1

 Press the + or – button to select a 

recording mode.

2

 Press the OK or 9 button.

3

 Press the + or – button to select a 

recording rate.

4

 Press the OK button to exit Recording 

mode selection.

1

 Press the + or – button to select the 

destination to save to (Memory) (For 

DM-520)

2

 Press the OK or 9 button to move 

to the [Folder] setting.

3

 Press the + or – button to select the 

destination to save to (Folder).

4

 Press the OK button to exit [Folder] 

setting selection.

Regardless of the recorder’s microphone 

sensitivity setting (☞ P.47), timer recording 

will start at a set microphone sensitivity.

1

 Press the + or – button to select from 

[High], [Middle], and [Low].

2

 Press the OK button to exit [Mic

Sense] selection.

1

 Pressing + or − button to select 

[Finish].

2

 Press the OK button to complete the 

setup screen. 

Programmed  settings  will  be  applied 

and the screen will return to the preset 

number selection menu. If the [On/Off] 

setting is set to [On], 

 will appear on 

the display.

a

 When setting to [On]

When  setting  other  preset  numbers, 

repeat Steps 2 through 6.

When the 9 button is pressed in the 

Select  in  Advance  Menu,  the  settings 

selected can be confirmed.

 Press the F or STOP 4 button to

•  The   will appear on the display.

•  If the recorder is in use at the preset start 

time, the timer recording will start directly 

after stopping the recorder.

•  Even if the power if turned off or the recorder 

is put on Hold, timer recording will start at a 

specified time.

•  If  three  timer  recordings  have  the  same 

starting times, [Preset 1] has the highest 

priority and [Preset 3] has the lowest.

•  If the starting time for timer recording and 

alarm playback (☞ P.64) is set for the same 

time, timer recording will have priority.

•  If  the  batteries  run  out  while  recording 

based on the timer setting, the recorder will 

stop recording. Check the battery power 

before starting the timer recording.