Olympus TG-320 Manuale Istruttivo

Preparing the Camera

Inserting the battery

Insert the battery by putting in the ▼ marked side

rst, with the C marks toward the battery lock knob.

Damage to the battery exterior (scratches, etc.) may
produce heat or an explosion.

Insert the battery while sliding the battery lock knob in

the direction of the arrow.

Battery/card/connector cover

Battery/card/connector cover lock

Battery/card/connector cover

Battery/card/connector cover lock

Battery lock knob

When removing the battery or card, be sure to turn off

the camera before opening or closing the battery/
card/connector cover.

When using the camera, be sure to close and lock

the battery/card/connector cover.

Slide the battery lock knob in the direction of the

arrow to unlock, and then remove the battery.

Charging the battery and setting up

using the supplied CD

Connect the camera to the computer to charge the battery
and use the supplied CD for setup.

User registration using the supplied CD and

installation of ib computer software is available on
Windows computers only.

The camera battery can be charged while the camera is
connected to a computer.

The indicator lamp lights during charging and turns
off when charging is complete.

Charging takes up to 3 hours.

If the indicator lamp does not light, the camera is not

correctly connected or the battery, camera, computer,
or USB cable may not be functioning as expected.

●