Olympus E-M5 Mark II (Ver 2.0) *2 Manuale Istruttivo

EN

Use after connecting the synchro cord to the hot shoe 
or external fl ash jack. When not using an external fl ash 
terminal, be sure to attach the cap.
When attaching a third-party fl ash to the camera’s hot shoe 
or external fl ash jack, be careful of the following points. 

Cap

• Using obsolete fl ash units that apply currents of more than about 250 V to the X-contact 

will damage the camera.

• Connecting fl ash units with signal contacts that do not conform to Olympus specifi cations 

may damage the camera.

•  Set the Shooting mode to M, set the shutter speed to a value no higher than fl ash 

synchronous speed, and set ISO sensitivity to a setting other than [AUTO]. 

•  Flash control can only be performed by manually setting the fl ash to the ISO sensitivity 

and aperture values selected with the camera. Flash brightness can be adjusted by 
adjusting either ISO sensitivity or aperture.

• Use a fl ash with an angle of illumination suited to the lens. Angle of illumination is usually 

expressed using 35-mm format equivalent focal lengths.

The camera requires a Four Thirds lens adapter to attach Four Thirds lenses. Some 
features, such as autofocus, may not be available.

Use when the slightest camera movement can result in blurred pictures, for example 
for macro or bulb photography. The remote cable attaches via the camera multi-
connector. (P. 10)

Converter lenses attach to the camera lens for quick and easy fi sh-eye or macro 
photography. See the OLYMPUS website for information on the lenses that can be 
used.

• 

 Use the appropriate lens attachment for SCN mode (f, w, or m).

You can exchange this for a larger eyecup.