Olympus WS-802 Manuale Introduttivo
85
7
EN
Troubleshooting
Troubleshooting
Symptom
Probable cause
Action
Nothing appears on
the display
the display
The battery is not loaded properly.
Verify that the battery polarities
= and
- are correct ( ☞ P.14).
Battery power is getting low.
Charge the battery (WS-803, WS-802
only) or replace with a new battery
(
only) or replace with a new battery
(
☞ P.14, P.16).
The power is off.
Turn the power on (
☞ P.19).
Won’t start
Battery power is getting low.
Charge the battery (WS-803, WS-802
only) or replace with a new battery
(
only) or replace with a new battery
(
☞ P.14, P.16).
The power is off.
Turn the power on (
☞ P.19).
The recorder is in HOLD mode.
Release the recorder from HOLD
(
(
☞ P.20).
Unable to record
Low remaining memory.
Erase unnecessary files (
☞ P.45).
The maximum number of files has
been reached.
been reached.
Change to another folder
(
(
☞ P.26 to P.28).
WS-803 only:
[ Output ] in the [ FM Radio ] settings is
set to [ Speaker ].
set to [ Speaker ].
Set [ Output ] to [ Earphone ] (
☞ P.67).
No playback sound
heard
heard
The earphones are connected.
Unplug the earphones to use the
built-in speaker.
built-in speaker.
[ Speaker ] is set to [ Off ].
To output from the built-in speaker,
set [ Speaker ] to [ On ] (
set [ Speaker ] to [ On ] (
☞ P.65).
The volume level is set to [ 00 ].
Adjust the volume level (
☞ P.36).
Recording level too
low
low
The microphone sensitivity is too low.
Set [ Rec Level ] to [ High ] or [ Middle ]
(
(
☞ P.56).
This could potentially be because
the output level for the connected
external devices is too low.
the output level for the connected
external devices is too low.
Adjust the output level for the
connected devices.
connected devices.
WS-803 only:
The recording level has not been
adjusted.
adjusted.
Adjust the recording level and then try
recording once more (
recording once more (
☞ P.56).