Olympus μ TOUGH-6000 Manuale Istruttivo

EN

1

Tap the right side of the camera body once.

FLASH AUTO

!

#

$

//

When tapping the camera’s top

The flash mode selection screen is displayed.

2

Tap the right or left side of the camera body to select a

function.

3

Tap the top of the camera body twice to confirm your

selection.

 Tap the camera firmly using the pad of your finger.
 When the camera is stabilized on a tripod for example, tap control

may not work properly.

 To prevent dropping the camera when using tap control, strap the

camera to your wrist.

When switched to playback mode by tapping the back of the

camera body once, the operations below can be used.
Display next image: Tap the right side of the camera once.
Display previous image: Tap the left side of the camera

once.

Start slideshow: Tap the top surface of the camera twice. (The slideshow will automatically

start for all images stored in internal memory or on the card, with [BGM] set to [OFF].)

Display next image during a slideshow: Tilt the camera right or tap the right side of the

camera once.

Display previous image during a slideshow: Tap the left side of the camera once.

Stop slideshow: Tap the top surface of the camera twice.

Return to the shooting mode: Tap the back side of the camera once.

1

Select [CALIBRATE] in Submenu 2 and press the

o button.

NORM

AVG

2

Select the part to adjust with AB and press the

o button.

3

Select the [STR] setting with AB and press the D button.

4

Select the [INTVL] setting with AB and press the

o button.

 Check the operation of the camera by tapping on the camera after making

the settings.

Turning off the camera sounds [F SILENT MODE]

F

SILENT MODE

OFF

Activates the [SOUND SETTINGS] setting.

ON

The electronic sounds (operating sound, shutter sound, warning sound) and playback

sounds are muted.

 [SOUND SETTINGS] (p. 42)